Sensing element of eddy-current probe coincides with the handle axis
Straight shaft ECP:
- typical absolute single-coil probe built according to the “Single coil” scheme
- designed for testing of complex-shape parts with open access
- applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.
Designation | Tip Ø ‘D’, | Length, | Centre | Connector | |
SU200K3Dx25-105 S | 3 | 105 | 200 kHz | Microdot | Fe/NFe |
SU200K4.5Dx25-105 S | 4.5 | 105 | 200 kHz | Fe/NFe | |
SU500K3Dx25-105 S | 3 | 105 | 500 kHz | Fe/NFe | |
SU500K4.5Dx25-105 S | 4.5 | 105 | 500 kHz | Fe/NFe | |
SU2М2.5Dx25-105 S | 2.5 | 105 | 2 MHz | NFe | |
SU2М3Dx25-105 S | 3 | 105 | 2 MHz | NFe | |
SU6М2.5Dx25-105 S | 2.5 | 105 | 6 MHz | NFe |
SU | 200K | 3D | x | 25 | - | 105 | S(Sh) |
1 | 2 | 3 |
| 4 |
| 5 | 6 |
1. SU – surface probe for surface flaws detection.
2. Probe frequency:
“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.
3. Probe tip diameter, mm
4. Shaft size, mm
5. Total probe length, mm. Standard length - of 105 mm (4.1") can be changed upon request.
6. Probe type designation: “S”. “S” – Single coil probe.
Probes of standard type are manufactured unshielded. In case a shielded probe is required, when making an order, please indicate the letters ”Sh” (Shielded) at the end of a designation code.