OKOndt GROUP goes on operating for your non-destructive testing needs. Our team works for you to offer the best NDT solutions of top quality, and impeccable services. In September, the group of our experts attended InnoTrans 2024 and could showcase our latest developments to the visitors, as well as discuss current NDT issues and future partnership

Straight Shaft Probe for sub-surface flaws detection in the second layer, through the first layer with up to 1.5 mm thickness (e.g., testing of load-bearing elements under aircraft skin) (Reflection type)

Request a Quote

Straight ECP for Subsurface Flaws Detection in the Second Layer through the First Layer with Up To 1.5 mm Thickness:

is an absolute probe built according to the “Reflection” scheme
designed for testing of load-bearing elements under an aircraft skin
applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.

Designation	Outer diameter, mm/inch	Length, mm/inch	Frequency	Connector	Material	Detected flaws
SSP3K11DASh	11/.43	39/1.5	1-25 kHz	Lemo 04	NFe	in aluminum through skin with up to 1.5 mm thickness
SSP3K11DASh	11/.43	39/1.5	1-25 kHz	Lemo 04	NFe	in titanium at 5 mm depth
SSP25K7DA	7/.28	50/2	12-40 kHz	Lemo 04	NFe	in aluminum through skin with up to 1.5 mm thickness
SSP25K10DA1	10/.39	50/2	12-40 kHz	Lemo 04	NFe	in aluminum through skin with up to 1.5 mm thickness
SSP25K10DA0	10/.39	50/2	12-40 kHz	Triax Lemo / Fischer	NFe	in aluminum through skin with up to 1.5 mm thickness

SSP	3K	11D	A	(Sh)
1	2	3	4	5

SSP – sub-surface probe for subsurface flaws detection.
Probe frequency:

“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.

Probe tip diameter, mm.
Probe type designation: “А”. А – Absolute.
Sh – Shielded sensing element. Absence of such designation mark means that the sensing element is made unshielded.